The BMW G42 M240i Eventuri Intake sounds amazing. The Eventuri Intakes for the BMW G42 M240i gives the driving experience a whole new dimension. The blow off sound of the turbo and intake sound so good when you release the throttle. The BMW G42 M240i Eventuri Intake also provides extra performance and tuning potential for those who look for high horsepower numbers. 

With special thanks to GP Products for providing us the opportunity to shoot this content. The BMW G42 M240i Eventuri Intake is available from our webshop and can also be installed in our workshop.

The BMW G42 M240i Eventuri Intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing the BMW G42 M240i Eventuri Intake. In the G42, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. 

This however, results in a restriction with only one stock air feed to draw air in from. During development of the BMW G42 M240i Eventuri Intake Eventuri noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to the airbox. Furthermore the sealed airbox from the BMW G42 M240i Eventuri Intake also has a heat shield with gold reflective to minimise the radiative heat transfer from the exhaust manifold. In order to maximise volume Eventuri made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4″) smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally Eventuri uses a custom made high-flow dry filter which is ISO tested for filtration performance and has a larger filtration area than the stock filter.

The BMW G42 M240i Eventuri Intake is the same product as the G20 M240i Eventuri Intake, check out our link below!